Smoke n sear addition

[ken g]

I either use gloves or a pair of pliers to pull it out. It is not in contact with hot charcoal for more than a couple minutes at most. However, it will still burn you.

[ken g]

With a little prodding from family I decided to look into the details of producing and selling this divider.

Two Questions:

-Carbon steel or stainless?
-If stainless, 201 or 304?

Stainless is more expensive is why I ask.
Stainless won't rust if left outside.
I keep mine inside with the SNS when not in use. So not concerned with rust.

[Gooner-que]

304 stainless to make it the same quality as the SnS/DnG.

[David Parrish]

With a little prodding from family I decided to look into the details of producing and selling this divider.

Two Questions:

-Carbon steel or stainless?
-If stainless, 201 or 304?

Stainless is more expensive is why I ask.
Stainless won't rust if left outside.
I keep mine inside with the SNS when not in use. So not concerned with rust.

Not 201 whatever you do. 430 is better than 201.

[David Parrish]

No discounts but we promise high quality and unparalleled service. Thank you for believing in us from the beginning

[Father87]

Ok placing order then :P

[Father87]

BTW Dave, I ordered, but noticed you don't sell the SNS and DNG together as a combo with a slight savings. Just thought I'd share that idea.

[Henrik]

Here's one of mine, completed (I made two). All I did was to weld a little angle iron bar to keep it in place, so it won't flip/flop when adding briquettes.



It could probably be improved even more, but this is good enough for me. And it was 10 minutes work, so I'm happy :-)

As for stainless, skip 201.

[Baker Dan]

I would buy it. Good job.

[SoCalTim]

Ingenious! The shop next to mine is a machine shop, just showed him - he told me he'd make one for me. Pretty cool.

[ken g]

I can get 55 pieces from a sheet of 304 stainless, 14 gauge. If I get enough buyers at $15.00 plus S&H, I will pull the trigger.

[pknj]

In

[BluesDaddy]

I'd buy one.

[Buck Flicks]

I'm in.

[rgriffeath]

I would definitely purchase one

[Meathead]

I recommend you and Dave talk to each other. Perhaps he can offer them to his customers and you could share the profits. Or perhaps you could license the concept to him for a percentage.

But I'd buy one!