I’ve been having trouble achieving good bark on pork butts. I’m using Meathead’s Memphis Dust rub recipe. Any help would be greatly appreciated!
Announcement
Collapse
No announcement yet.
Need Help Achieving Good Bark!
Collapse
X
-
Club Member
- Apr 2016
- 18129
- Near Richmond VA
-
Weber Performer Deluxe
SNS
Pizza insert
Rotisserie
Cookshack Smokette Elite
2 Thermapens
Chefalarm
Dot
lots of probes.
Fireboard
If you are wrapping, wait until after the stall at around 180* - 185*. I t would hepl if we knew what you are doing.
What cooker?
What temp?
Are you wrapping?
When are you taking it off the cooker? (By temp or time, or something else.)
Don't worry - we will help you figure it out.
- Likes 3
Comment
-
I have a Weber Performer with SNS and a PBC. It has been my experience if I want great pork bark I will not wrap during or after the cook; and, the Weber always produces the better bark of the 2 cookers. I cook to an internal temperature of 195-198, verify with a probe tender test, and pull the pork within 30 minutes of coming off the cooker. I do not spritz or inject. I just dry brine and use a modified Memphis Dust (I substitute Hatch chili powder for paprika) for the rub. For me, this consistently yields great bark and moist meat.
- Likes 3
Comment
-
Club Member
- Jun 2018
- 186
- Round Rock, TX
-
New Orleans born, Mississippi raised, empty nester, living in Central Texas for 20+ years - looking to buy my first pellet smoker. Awed by the info on this site already!
Originally posted by RustyHaines View PostI have a Weber Performer with SNS and a PBC. It has been my experience if I want great pork bark I will not wrap during or after the cook; and, the Weber always produces the better bark of the 2 cookers. I cook to an internal temperature of 195-198, verify with a probe tender test, and pull the pork within 30 minutes of coming off the cooker. I do not spritz or inject. I just dry brine and use a modified Memphis Dust (I substitute Hatch chili powder for paprika) for the rub. For me, this consistently yields great bark and moist meat.
- Likes 2
Comment
-
Club Member
- Sep 2016
- 1351
- Spokane, WA
-
Weber 22" (4 of them)
Weber Ranch
Weber 26"
SNS Kettle
PK Grill (40+ years old)
Weber Jumbo Joe
Thermoworks Smoke, DOT, Signals, Smoke X4, and Thermopop
Slow n' Sear XL (2)
Slow n' Sear
http://completecarnivore.com is my site
- Likes 4
Comment
-
Founding Member & Pit Barrel Cooker Queen
- Jul 2014
- 7191
-
My toys:
Weber Summit Charcoal Grilling Center (WSCGC) aka Mr. Fancypants
Pit Barrel Cooker (which rocks), named Pretty Baby
Weber Summit S650 Gas Grill, named Hot 'n Fast (used mostly for searing and griddling)
Weber Kettle Premium 22" named Kettle Kid, eager to horn in with more cooks in the future
Camp Chef Somerset IV 4-burner outdoor gas range named AfterBurner due to its 30kBTU burners
Adrenaline BBQ Company Gear:SnS Low Profile, DnG, and Large Charcoal Basket, for WSCGC
SnS Deluxe for 22" Kettle
Elevated SS Rack for WSCGC
SS Rack for DnG
Cast Iron GriddleGrill Grate for SnSGrill Grates: five 17.375 sections (retired to storage)
Grill Grates: six 19.25 panels for exact fit for Summit S650
gasser
Grill Grates for 22" Kettle
2 Grill Grate Griddles
Steelmade Griddle for Summit gas grill
Fireboard Gear:Extreme BBQ Thermometer PackagePit Viper Fan (to pair with Fireboard Fan Driver Cable)
Additional control unit
Additional probes: Competition Probes 1" (3) and 4" (1), 3 additional Ambient Probes. 1 additional Food Probe
2 Driver Cables
Pit Viper Fan new design (to pair with Fireboard Fan Driver Cable)
Thermoworks Gear:Thermapen MK4 (pink)Maverick ET 73 a little workhorse with limited range
Thermapen Classic (pink too)
Thermoworks MK4 orange
Temp Test 2 Smart Thermometer
Extra Big and Loud Timer
Timestick Trio
Maverick ET 733
Maverick (Ivation) ET 732
Grill Pinz
Vortex (two of them)
18" drip pan for WSCGC
Ceramic Spacers for WSCGC in Kamado Mode: 2 sets each 1/2", 1", 2". The 2" spacers work best with the 18" drip pan. The 1+1/2 inch spacers work best with the 14 inch cake pan.
Two Joule Sous Vide devices
3 Lipavi Sous Vide Tubs with Lids: 12, 18 and 26 quarts
Avid Armor Ultra Pro V32 Chamber Sealer
Instant Pot 6 Quart Electric Pressure Cooker
Instant Pot 10 Quart Electric Pressure Cooker
Charcoal Companion TurboQue
A-Maze-N tube 12 inch tube smoker accessory for use with pellets
BBQ Dragon and Dragon Chimney
Shun Classic Series:8" Chef Knife
6" Chef's Knife
Gokujo Boning and Fillet Knife
3 1/2 inch Paring Knife
I double dog ditto what most of you are saying: dry brine overnight, rub with MMD before smoking, no injection, no wrap, no faux cambro. Smoke to probe tender, pull and eat.
I get great bark on my PBC; I'd call it comparable to my SnS/WSCGC combo. The PBC often runs just a bit hotter than the WSCGC though.
Kathryn
- Likes 2
Comment
-
Club Member
- Nov 2017
- 7147
- Huntsville, Alabama
-
Jim Morris
Cookers- Slow 'N Sear Deluxe Kamado (2021)
- Camp Chef FTG900 Flat Top Grill (2020)
- Weber Genesis II E-410 w/ GrillGrates (2019)
- Weber Performer Deluxe 22.5" w/ GrillGrates & Slow 'N Sear & Drip N Griddle & Vortex & Party Q & Rotisserie (2007)
- Custom Built Offset Smoker (304SS, 22"x34" grate, circa 1985)
- King Kooker 94/90TKD 105K/60K dual burner patio stove
- Lodge L8D03 5 quart dutch oven
- Lodge L10SK3 12" skillet
- Anova
- Thermoworks Smoke w/ Wifi Gateway
- Thermoworks Dot
- Thermoworks Thermapen Classic
- Thermoworks RT600C
- Weber Connect
- Whatever I brewed and have on tap!
Not much to add, but I second the no wrap comments above. I don't wrap my butts, and set the high temp alarm on the meat to 203F and let it ride. I used to cook to 195F, but now know that "probe tender" is a thing, but like that most of the fat renders if I go to 203F. I get great bark on both the kettle+SNS and my offset.
I also do not wrap after the cook, just let it sit in a pan for a few minutes on the kitchen counter, mostly to cool down, then get out my meat claws and shred it up.
- Likes 2
Comment
-
Club Member
- Aug 2017
- 9998
- Hate Less, Cook More
-
OUTDOOR COOKERS
BBQ ACCESSORIES
WOOD & PELLET PREFERENCES
SOUS VIDE
INDOOR COOKWARE
Did some mini-center cut butts over the weekend, about 4# each. Got started late, did them on my kettle. My Fireboard grate probe kept reading between 175-200* but no more. I'm scratching my head, plenty of charcoal, burning nicely. Bi-metal thermo (which is accurate if you calibrate it to the Fireboard) was reading really hot. All of a sudden I get this spike on the graph that goes from 175* to 300*. Then within about 2 minutes it drops to 250* then settles back down to 175* again. I'm trying to cook at 275* for a hotter, faster result it's getting later in the afternoon.
So I'm thinking, oh crap now my Fireboard is going crazy again. Only had this replacement unit for about 4-5 months. Luckily I had another grate probe that came with the original Ultimate package so I swapped it out and bingo, rock solid at 275*. Problem solved and I kissed my Fireboard for good luck !!
So anyway, what's this got to do with achieving good bark? Well although I tend to agree that riding nekkid with every protein I cook is the preferred method, I'm not opposed to wrapping with butcher paper to power through a stall. It was almost 8 pm by the time I got things sorted in the cooker and my ITs were only around 170* so I wrapped. Bark by that time was set well. I didn't suffer any degradation to the bark in doing so and managed to get the meat done in about another hour as a result. Rested for about 30-40 minutes then pulled. Drug my butt to bed about 11:30 pm.
So the moral to the story is give yourself enough time obviously, but also to let your cook go as long as you can. I like to spritz because I believe moisture is very key to bark formation and the polymerization of the upper layer of the meat. Also let it ride and get fully developed, go unwrapped if you choose but use butcher paper if you need to power through a stall. Foil is my last choice since it tends to braise too much and gives a pot roast like finish while softening your bark, exactly what you are trying to avoid.
- Likes 4
Comment
-
Since my original post I purchased a Rec Tec Bull. Yesterday I smoked a 9# Pork Butt and had good bark forming. Cooked at 250 with combo of hickory and black cherry pellets. Spritzed with a mixture of Apple Juice, lil ACV and bourbon(not the good stuff) about every hour. This photo is after about 4 hrs. Wrapped in foil at 160.
Overall cook took about 11.5 hrs. 2nd photo is at the end of the cook. Pulled at 203 and let it test for about 1 hr. Bark was a bit mushy so next time I think I’m going old school with no wrap or if I wrap it’ll be in peach butcher paper! Thanks for everyone’s input! God Bless!!!
- Likes 3
Comment
Announcement
Collapse
No announcement yet.
Comment