Hey everybody! I'm going make a cart station for my 26 inch kettle. I found a great video for something easy enough for me to do. Problem is that I'm not super handy and I need help adjusting the cut list and supplies needed because the video is for a 22" kettle (yikes or is that an 18"?).
I'm thinking maybe just an additional 2X6 board for the table top to make it wider make the top boards 46" long instead of 40".
There's the 27" length 2X4s for the underside of the table and the bottom storage between the legs. I'm guessing she chose 27" because the top is 5 boards each 6" wide for a total width of 30" and then the 27" is slightly less wide than the top. So with an additional 2x6 on top that's 36" width for the top meaning I should do ~32 inches for the boards underneath? If the table's going to be 46" long I will probably need an additional fence board for the bottom shelf too right?
Thanks if you can help me sort this out
https://www.youtube.com/watch?v=Hu8ObEUIfxk
Original Cut List
8 @ 32 x 2 x 4 inches - legs, nailed or glued together
5 @ 40 x 2 x 6 inches - table top pieces
5 @ 27 1/2 x 2 x 4 inches - top is screwed to these pieces
2 @ 27 x 2 x 4 inches
5 @ 27 x fence boards - bottom shelf
Proposed Cut List for 26" (Changes highlighted in red)
8 @ 32 x 2 x 4 inches - legs, nailed or glued together
6 @ 46 x 2 x 6 inches - table top pieces
5 @ 32 1/2 x 2 x 4 inches - top is screwed to these pieces
2 @ 32 x 2 x 4 inches (These ones I am not sure about I think they run from leg to leg and the bottom shelf boards lay across them do I need to make them even longer to account for the table being longer?)
6 @ 32 x fence boards - bottom shelf
I'm thinking maybe just an additional 2X6 board for the table top to make it wider make the top boards 46" long instead of 40".
There's the 27" length 2X4s for the underside of the table and the bottom storage between the legs. I'm guessing she chose 27" because the top is 5 boards each 6" wide for a total width of 30" and then the 27" is slightly less wide than the top. So with an additional 2x6 on top that's 36" width for the top meaning I should do ~32 inches for the boards underneath? If the table's going to be 46" long I will probably need an additional fence board for the bottom shelf too right?
Thanks if you can help me sort this out
https://www.youtube.com/watch?v=Hu8ObEUIfxk
Original Cut List
8 @ 32 x 2 x 4 inches - legs, nailed or glued together
5 @ 40 x 2 x 6 inches - table top pieces
5 @ 27 1/2 x 2 x 4 inches - top is screwed to these pieces
2 @ 27 x 2 x 4 inches
5 @ 27 x fence boards - bottom shelf
Proposed Cut List for 26" (Changes highlighted in red)
8 @ 32 x 2 x 4 inches - legs, nailed or glued together
6 @ 46 x 2 x 6 inches - table top pieces
5 @ 32 1/2 x 2 x 4 inches - top is screwed to these pieces
2 @ 32 x 2 x 4 inches (These ones I am not sure about I think they run from leg to leg and the bottom shelf boards lay across them do I need to make them even longer to account for the table being longer?)
6 @ 32 x fence boards - bottom shelf
Comment