Welcome!


This is a membership forum. As a guest, you can click around a bit. View 5 pages for free. If you would like to participate, please join.

[ Pitmaster Club Information | Join Now | Login | Contact Us ]

There are 4 page views remaining.

Announcement

Collapse
No announcement yet.

Weber 22.5" One Touch Gold - 2014 Model

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • cdd315
    replied
    I just thought I'd add a couple measurements. The new model seems to have bottom vent positions a little different than the 2014 model. Keep in mind though that the older model has round holes, and the 2015 model has slotted holes.

    Distance between holes = 7/8"

    Click image for larger version

Name:	IMG_4896.jpg
Views:	8
Size:	51.7 KB
ID:	48089


    I also thought I'd include the diameter of the bottom opening for the ash tray which is about 10"


    Click image for larger version

Name:	IMG_4897.jpg
Views:	8
Size:	36.6 KB
ID:	48091
    Last edited by cdd315; January 3, 2015, 02:13 AM.

    Leave a comment:


  • cdd315
    commented on 's reply
    No rainy weather outside of my garage Lol!!

  • David Parrish
    replied
    Originally posted by Huskee View Post
    Good job cdd. I should add a couple more measurements...but it's realy cold and now my grill is full of ash.....

    Real barbecue pros have dirty grills.

    Leave a comment:


  • Huskee
    replied
    Good job cdd. I should add a couple more measurements...but it's realy cold and now my grill is full of ash.....

    Leave a comment:


  • Jerod Broussard
    replied
    Looks like the inside of a garage, with rainy weather outside. Had to make sure you were not in MY garage. hahaha

    Leave a comment:


  • cdd315
    replied
    I wish the pictures would have shown up larger .. I hope I'm not having issues like others!

    Leave a comment:


  • cdd315
    replied
    Full outside width of the kettle = ~22 5/8"

    Click image for larger version

Name:	IMG_4886-2.jpg
Views:	8
Size:	38.4 KB
ID:	48092


    Grate width = ~21 1/2"

    Click image for larger version

Name:	IMG_4887-2.jpg
Views:	9
Size:	29.9 KB
ID:	48093


    Height from the bottom grate to the top = 5"

    Click image for larger version

Name:	IMG_4888-2.jpg
Views:	8
Size:	30.4 KB
ID:	48094


    Height from the top grate to the lip of the body = 2 1/4"

    Click image for larger version

Name:	IMG_4890-2.jpg
Views:	10
Size:	18.9 KB
ID:	48095


    From the thermometer to the bottom of the lid = 4 1/2"

    Click image for larger version

Name:	IMG_4892-3.jpg
Views:	10
Size:	15.9 KB
ID:	48096


    Image sizes are all over the place.

    I notice a few differences between kettles .. nothing major though. Seems like the older model grate is recessed more to 2 1/4" instead of 2". The outside is actually 22 5/8 and inside is 22". Grate though is the same. Huskee didn't measure the lower grate to upper grate. The legs don't have the push lock deally like the new model.

    Performance I would expect to be the same however.
    Last edited by cdd315; January 3, 2015, 02:20 AM.

    Leave a comment:


  • cdd315
    replied
    Just at the end of the second hole is probably about half.

    Click image for larger version

Name:	IMG_4879-2.jpg
Views:	8
Size:	42.4 KB
ID:	47384
    Click image for larger version

Name:	IMG_4880-2.jpg
Views:	8
Size:	23.9 KB
ID:	47385


    At the start of the third hole, about 3/4.


    Click image for larger version

Name:	IMG_4881-2.jpg
Views:	9
Size:	33.3 KB
ID:	47386
    Click image for larger version

Name:	IMG_4882-2.jpg
Views:	7
Size:	24.8 KB
ID:	47387


    Not sure why these ones of the pit are smaller??


    The start of the 4th hole .. full open.

    Click image for larger version

Name:	IMG_4883-2.jpg
Views:	7
Size:	25.2 KB
ID:	47388
    Click image for larger version

Name:	IMG_4884-2.jpg
Views:	8
Size:	17.5 KB
ID:	47389

    Leave a comment:


  • cdd315
    started a topic Weber 22.5" One Touch Gold - 2014 Model

    Weber 22.5" One Touch Gold - 2014 Model

    Since I was curious with Huskee's post regarding measurements and his 2015 model, I decided to dig mine out from under the deck. Here is a comparison with changes to last years model.

    Classic Black
    Click image for larger version

Name:	IMG_4873-2.jpg
Views:	9
Size:	47.7 KB
ID:	47369



    Thermometer and top vent 90 degrees to each other.
    Click image for larger version

Name:	IMG_4874-2.jpg
Views:	8
Size:	37.8 KB
ID:	47370



    At the start of the second hole the vent is just starting to open
    Click image for larger version

Name:	IMG_4875-2.jpg
Views:	8
Size:	39.1 KB
ID:	47371
    Click image for larger version

Name:	IMG_4876-2.jpg
Views:	8
Size:	92.6 KB
ID:	47372


    Excuse the mess inside .. didn't feel like cleaning it out


    Middle of the second hole is about 1/4.
    Click image for larger version

Name:	IMG_4877-2.jpg
Views:	8
Size:	37.8 KB
ID:	47373
    Click image for larger version

Name:	IMG_4878-2.jpg
Views:	8
Size:	99.1 KB
ID:	47374

    Attached Files
    Last edited by cdd315; January 1, 2015, 05:58 PM.

Announcement

Collapse
No announcement yet.
Working...
X
false
0
Guest
500
["pitmaster-my-membership","login","join-pitmaster","lostpw","reset-password","special-offers","help","nojs","meat-ups","gifts","authaau-alpha","ebooklogin-start","alpha","start"]
false
false
{"count":0,"link":"/forum/announcements/","debug":""}
Yes
Rubs Promo
Meat-Up in Memphis