Announcement
Collapse
No announcement yet.
Getting the smoke started
Collapse
X
-
Thanks Huskee. I will play around with some different setups. Oh well, I guess I will just have to keep on making rack after rack until I find what works.
-
You shouldn't have to worry about burning aluminum in a standard cooking fire. The heat needed just isn't there in charcoal or wood fires used in a grill or smoker. And yes, you can place the pan right on the coals, but most put it above the fire on a grate for easier access. You just want the wood in contact with the direct heat, how you place it can vary depending on your setup.
Leave a comment:
-
Thanks for the input... I checked out the smoke bombs and the foil packs, but I am unclear on a couple of things.
First, if you use a foil pack and place it on the coals isn't it bad like toxic to burn foil?
Second, using the foil pan method where do you put the pan. On the coal (in which case see first question) or above the coals.
Leave a comment:
-
I agree with Pit Boss on the soaking. I should have mentioned I gave that up a couple of years ago. Last year I switched to chunks. Home Depot has been stocking a variety of wood types at about $7 for a good sized bag. Lowes was carrying them too and I would imagine many home improvement stores would have them as well.
Leave a comment:
-
First, Don't soak your wood.
Check out Zen of Wood then search "Meathead's Smoke Bombs." You can make these with an aluminum foil pouch too.
Leave a comment:
-
When I was using chips, I'd soak them for about an hour, wrap them in some heavy duty aluminum foil, cut a few holes in the top, and drop them right on the coals. They would eventually begin smoldering and last a while before the coals burned through the bottom of the foil.
My process was very similar to this guy's approach:
Leave a comment:
-
Getting the smoke started
Hey All,
I starting to experiment with using smoke and I can't seem to get it started. First some background. I'm using a 22.5 weber kettle, reg. kingsford coal, and for now chips (its the most readily available and in my tight budget). I tried to put the chips in a foil loaf pan, but was not sure where to place it. I tried on the cooking grate, next to the coals, and resting on the coals nothing seemed to work. Finally tossed loose chips into area of coals that had heavy ash which kept the chips from bursting into flames, which is my understanding what you don't want them to do. Can someone help a brother out.....let me know what you all do. Thanks!Tags: None
Announcement
Collapse
No announcement yet.
Leave a comment: