Welcome!


This is a membership forum. As a guest, you can click around a bit. View 5 pages for free. If you would like to participate, please join.

[ Pitmaster Club Information | Join Now | Login | Contact Us ]

There are 4 page views remaining.

Announcement

Collapse
No announcement yet.

Installing BBQGuru XL Dome adapter and Pit Viper fan in PBC

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • UncleSpike
    replied
    Hi there. I'm wondering how this turned out for you... Are you able to control the temps with this? Can you hold it at 225, or 275, or 350?

    Leave a comment:


  • Thomassen
    replied
    I like your set up using the inner lip of the barrel and the original screw hole. I installed my adaptor horizontally and drilled four holes to attach it with wing nut screws.

    Leave a comment:


  • BFlynn
    replied
    Nice install!

    I did mine from the outside. That looks clean.

    Fun fact, the opening for the adapter is pretty close to the same area of air flow as you have on the PBC in it's natural setting. So if you just don't plug the fan in, it runs just like normal

    Leave a comment:


  • fzxdoc
    replied
    The Pit Viper fits pretty tightly onto the adapter, KuKuPuffs . Certainly no leaks. Because it tends to weigh the adapter down, creating a small gap around the BBQ Guru Adapter at the bottom of the barrel area, I bolster it up under the nozzle of the Pit Viper with a small piece of wadded aluminum foil between the adapter nozzle and the edge of the rolling cart on which I have the PBC. This works great. It's not really necessary, but does remove the tension on the adapter.

    About the selector being open/closed: for some cookers, the air flow from the Pit Viper might be too high, causing ash to swirl or temps having a hard time regulating. I don't have that problem with my PBC so I leave the Pit Viper wide open all the time. One less thing to mess with, I tell myself.

    Kathryn
    Last edited by fzxdoc; December 4, 2021, 05:59 PM.

    Leave a comment:


  • KuKuPuffs
    replied
    Originally posted by fzxdoc View Post
    That's exactly how I installed my BBQ Guru PBC adapter. Don't worry about any air gap. I makes not a hill o' beans worth of difference.

    The Pit Viper 10CFM fan and Fireboard Drive makes the PBC temps spin like a top--that is, right on.

    FWIW, I leave the Pit Viper selector to fully Open all the time

    Kathryn
    What's the purpose of the selector leaving it open or closed?
    Also is your Pit Viper a tight fit on the Adapter? Feels like I really have to push hard to get it in. I'm wondering if I should be oiling it up or something to a make it easier to install and remove

    Leave a comment:


  • fzxdoc
    replied
    That's exactly how I installed my BBQ Guru PBC adapter. Don't worry about any air gap. I makes not a hill o' beans worth of difference.

    The Pit Viper 10CFM fan and Fireboard Drive makes the PBC temps spin like a top--that is, right on.

    FWIW, I leave the Pit Viper selector to fully Open all the time

    Kathryn
    Last edited by fzxdoc; December 4, 2021, 02:19 PM.

    Leave a comment:


  • Alabama Smoke
    replied
    KuKuPuffs thanks so much for the pictured tutorial. I just purchased the identical items from BBQ Guru. The guy I spoke with there said to do just what you have done. Thanks again, Tom

    Leave a comment:


  • bbqLuv
    replied
    I like it. Temp control via a feedback loop, just the way a pellet grill works. Not new technology.
    Happy BBQ to you and PBC too

    Leave a comment:


  • Installing BBQGuru XL Dome adapter and Pit Viper fan in PBC

    My PBC always tends to run low to the point (200f and under)where I constantly have to crack the lid. Switching from Kingsford to B&B Lump Charcoal has helped but I still need to check on the PBC more often than I like. So in order to try and achieve that "set it and forget it" I'm going to try using temperature controllers and it seems on Amazing Ribs the favorite combo is a Pit Viper Fan teamed up with a Fireboard.

    Installing the BBQGuru XL Dome Adapter was pretty easy. Before beginning, on the inside of the PBC, you might want to scrape away some of the gunk at the bottom with a screw driver or painter tool. There's an indented lip that runs around the edge of the bottom where it meets the wall that the Adapter will sit in.

    Click image for larger version  Name:	IMG_0494.jpg Views:	0 Size:	1.84 MB ID:	1136857

    First, line up the adapter on from the inside. Then use a sharpie to mark the hole where the original vent screw was.

    Click image for larger version  Name:	IMG_0499.jpg Views:	0 Size:	1.40 MB ID:	1136855


    Then slowly using lower drill bits, I gradually increased the bit size and settled on 3/16 as the final size

    Click image for larger version  Name:	IMG_0498.jpg Views:	0 Size:	590.5 KB ID:	1136856

    Then gently by hand creating a bit of a curve in the adapter to match the curve of the PBC. you really only have to curve the bottom of the adapter. The top will naturally curve to the PBC once the screw is tightened

    Click image for larger version  Name:	IMG_0502.jpg Views:	0 Size:	2.09 MB ID:	1136858

    Insert the Pit Viper Fan

    Click image for larger version  Name:	IMG_0519.jpg Views:	0 Size:	1.20 MB ID:	1136859

    Can't wait to try to smoke something on this thing, I do realize it's probably not a perfect seal, if it leaks to much I'll think about adding some thermal tape or something to make it more air tight. For now I like it this way since I can easily remove the adapter and return it back to it's stock configuration.

    Hope this post was useful for others looking to mod their PBC the same way
    Last edited by KuKuPuffs; December 4, 2021, 08:55 AM.

Announcement

Collapse
No announcement yet.
Working...
X
false
0
Guest
500
["pitmaster-my-membership","login","join-pitmaster","lostpw","reset-password","special-offers","help","nojs","meat-ups","gifts","authaau-alpha","ebooklogin-start","alpha","start"]
false
false
{"count":0,"link":"/forum/announcements/","debug":""}
Yes
Rubs Promo

Spotlight

These are not ads or paid placements. These are some of our favorite tools and toys.

These are products we have tested, won our top awards, and are highly recommend. Click here to read how we test, about our medals, and what they mean.

Use Our Links To Help Keep Us Alive

A big part of this site is our unbiased equipment and product reviews. We love playing with toys and we have no problem calling them the way we see them. Some companies pay a finder’s fee if a reader clicks a link on AmazingRibs.com and buys a product. It has zero impact on our reviews, zero impact on the price you pay, and the sites never tell us what you bought, but it has a major impact on our ability to keep this site alive! So before you buy, please click our links. Here’s a link that takes you to a page on Amazon that has some of our favorite tools and toys: https://tinyurl.com/amazingribs

 

Comprehensive Temperature Magnet With 80+ Important Temps

Amazingribs.com temperature magnet
Winner of the National BBQ Association’s product of the year award. This 8.5″ x 11″ magnet contains more that 80 benchmark temperatures for meats (both USDA recommended temps as well as the temps chefs recommend), fats and oils, sugars, sous vide, eggs, collagens, wood combustion, breads, and more. Although it is not certified as all-weather, we have tested it outdoors in Chicago weather and it has not delaminated in three years, but there is minor fading.

Click here to order.


Finally, A Great Portable Pellet Smoker


Green Mountain’s portable Davy Crockett Pellet Smoker is one mean tailgating and picnic machine. But it’s also gaining popularity with people who want to add a small, set it and forget it pellet smoker to their backyard arsenal. And with their WiFi capabilities you can control and monitor Davy Crocket from your smart phone or laptop.

Click here to read our detailed review and to order


Blackstone Rangetop Combo: Griddle And Deep Fryer In One


The flat top does the burgers and the fryer does the fries. Use the griddle for bacon, eggs, grilled cheese, and so much more. And why deep fry indoors when you can avoid the smell and mess by doing it outside!

Click here to read our detailed review and to order


The Good-One Is A Superb Grill And A Superb Smoker All In One


The Good-One Open Range is dramatically different from a traditional offset smoker. By placing the heat source behind and under the smokebox instead of off to the side, Open Range produces even temperature from left to right, something almost impossible to achieve with a standard barrel shaped offset.

Click here to read our†complete review



Surely you know somebody who loves outdoor cooking who deserves a gift for the holidays, birthday, anniversary, or just for being wonderful. There he is, right in the mirror! Here are our selections of best ideas, all Platinum or Gold Medalists, listed by price.

Click here to see our list of Gold Medal Gifts


The Cool Kettle With The Hinged Hood We Always Wanted


Napoleon’s 22″ Pro Cart Charcoal Kettle Grill puts a few spins on the familiar kettle design. In fact, the hinged lid with a handle on the front, spins in a rotary motion 180 degrees. It’s hard to beat a Weber kettle, but Napoleon holds its own and adds some unique features to make the 22″ Pro Cart a viable alternative.

Click here for more about what makes this grill special


Fireboard: The Ultimate Top Of The Line BBQ Thermometer

Fireboard Labs Product Photo Shoot. Kansas City Commercial Portrait and Wedding Photographers ©Kevin Ashley Photography

With the ability to monitor up to six temperatures simultaneously with either Bluetooth or Wifi on your mobile phone, tablet, or computer, Fireboard is the best digital thermometer we’ve tested.
Click here to read our detailed†review