Been replacing some of my warped plastic cutting boards, but had a few that were flat, but rough enough to eat the dish wand. Also, had a new cordless random orbit sander to test out, so cleaned up some cutting boards to keep them out of the trash for now. Took maybe 5 mins a board. After I did the first couple, I thought wow, that really does work pretty well, maybe I should snap a couple pics.
Well you got the wrong color cordless sander, but thankfully it was up to this task. I'm too lazy to sand mine, so they get a quick trip through the 13" planer.
Well you got the wrong color cordless sander, but thankfully it was up to this task. I'm too lazy to sand mine, so they get a quick trip through the 13" planer.
LOL, Waiting for the Worms when I upgraded from NiCd to lithium, I first tried a different color. It was a drill first. I ended up buying 3 of that different color from 3 different places and each one had the chuck pressed on crooked. Bad QA gave yellow my business and I’m too invested now. Even my weed whacker and leaf blower use these batteries.
Murdy that’s why I’ve gone all yellow. I keep a charger in the garage and one in the shop and several spares in a drawer since I’m always planning to buy a bare tool and find the kit for like $20 more giving me another battery. Now the batteries could be anywhere though.
I try and stick with all Ryobi products. They’re the best for the number of cordless tools made and their batteries work with all their cordless tools. The products themselves are also pretty decent quality.
I'm solidly in the Red camp for cordless tools, and I totally understand that once you commit to one color, it is very hard to change. The convenience of having one battery fit everything isn't something you just give up.
John "JR"
Minnesota/ United States of America
******************************************** Grills/Smokers/Fryers Big Green Egg (Large) X3
Blackstone 36" Outdoor Griddle 4-Burner
Burch Barrel V-1 Karubeque C-60 Kamado Joe Jr. (Black) Lodge L410 Hibachi Pit Barrel Cooker Pit Barrel Cooker 2.0
Pit Barrel PBX
R&V Works FF2-R-ST 4-Gallon Fryer *******************************************. Thermometers
FireBoard (Base Package)
Thermoworks ThermaPen (Red)
Thermoworks MK4 (Orange)
********************************* Accessories Big Green Egg Plate Setter
Benzomatic TS800 High Temp Torch X 2 Bayou Classic 44 qt Stainless Stock Pot
Bayou Classic 35K BTU Burner Eggspander Kit X2 Finex Cat Iron Line FireBoard Drive Lots and Lots of Griswold Cast Iron Grill Grates Joule Water Circulator
KBQ Fire Grate Kick Ash Basket (KAB) X4 Lots of Lodge Cast Iron Husky 6 Drawer BBQ Equipment Cabinet Large Vortex Marlin 1894 .44 Magnum Marquette Castings No. 13 (First Run) Smithey No. 12 Smokeware Chimney Cap X 3 Stargazer No.10, 12 ******************************** Fuel FOGO Priemium Lump Charcoal Kingsford Blue and White B&B Charcoal Apple, Cherry & Oak Log splits for the C-60 ************************************************* Cutlery Buck 119 Special
Cuda 7' Fillet Knife Dexter 12" Brisket Sword Global Shun Wusthof ********** Next Major Purchase Lone Star Grillz 24 X 48 Offset
Great idea. I never thought about this for my NSF board I use to take to cooks. Those plastic boards are always such a pain to clean, especially with BBQ stuff all over them. Pork Belly Burnt Ends seem to be the worst to clean off. Must be all that GLAZE!
Spinaker and everyone else. This is the best stuff for cleaning stains off plastic cutting boards. I also have a white plastic cutting board similar to glitchy ‘s. This works best in the sun. Take it outside and place it flat on the concrete or a small table, whatever. Completely spray one side and let it sit in direct sunlight for an hour or two. This Clorox spray will return your board to almost new looking. Repeat if necessary. I’ve had all kinds of stains on mine that scrubbing just wouldn’t take off. This stuff is magic.
EDIT: You don’t have to use it in sunlight, it just works a little bit better and quicker.
Last edited by Panhead John; August 19, 2021, 04:01 PM.
I'm too lazy to sand mine, so they get a quick trip through the 13" planer.
Comment